Specs

 

Here is the spec sheet as shown on sailboatdata.com:

 

 370320

 

Hull Type:  Fin w/spade rudder Rig Type:  Masthead Sloop
LOA:  25.92′ / 7.90m LWL:  21.67′ / 6.61m
Beam:  7.67′ / 2.34m Listed SA:  302 ft2 / 28.06 m2
Draft (max.)  4.67′ / 1.42m Draft (min.)  
Disp.  3770 lbs./ 1710 kgs. Ballast:  1605 lbs. / 728 kgs.
SA/Disp.:  20.00 Bal./Disp.:  42.57% Disp./Len.:  165.39
Designer:  William Crealock
Builder:  Wayfarer Yacht Corp. (USA)
Construct.:  FG Bal. type:  Lead
First Built:  1967 Last Built:   # Built:  220
RIG DIMENSIONS  KEY
I:  30.02′ / 9.15m J:  10.29′ / 3.14m
P:  26.08′ / 7.95m E:  11.33′ / 3.45m
PY:   EY:  
SPL:   ISP:  30
SA(Fore.):  154.45 ft2 / 14.35 m2 SA(Main):  147.74 ft2 / 13.73 m2
Total(calc.)SA:   302.20 ft2 / 28.07 m2 DL ratio:  165.39
SA/Disp:  20.02 Est. Forestay Len.:  31.73′ / 9.67m

 


Additional ratings found at SailingJoy.com’s Excalibur 26 Page

PHRF Rating

High      216
Low       228
Average   222

Source: US Sailing
More Details: Rig Dimensions

Performance Calculations

Maximum Hull Speed               6.24 kts
Capsize Screening Formula        1.97
Sail Area/Displacement (SA/D)    19.95  (Cruiser-Racer)
Displacement/Length (D/L)        165.39 (Light Displacement)
Motion Comfort Ratio             15.7

Note: The performance calculations are theoretical numbers which are calculated off the specifications of the vessel and should be used for educational purposes only. For actual performance statistics contact the manufacturer of the vessel.


Special thanks to Michael Robinson for sending me the following images! (Click to enlarge)

Courtesy of Howard Gilbert via Michael Robinson, where he was able to create a hig-res blueprint of the line drawing:

Enhanced Blueprint Line Drawing

Comments are closed.